GOCART (Goddard Chemistry Aerosol Radiation and Transport) model

GOCART simulates major tropospheric aerosol components, including sulfate, dust, black carbon (BC), organic carbon (OC), and sea-salt aerosols.

troposphericaerosolChemistryRadiationTransport
  317

Contributor

contributed at 2020-01-03

Authorship

Homepage:  
View
Is authorship not correct? Feed back

Classification(s)

Application-focused categoriesNatural-perspectiveAtmospheric regions

Model Description

English {{currentDetailLanguage}} English

Quoted from: https://acd-ext.gsfc.nasa.gov/People/Chin/gocartinfo.html#:~:text=The%20Goddard%20Chemistry%20Aerosol%20Radiation,references%20listed%20at%20the%20end)

The GOCART model uses the assimilated meteorological fields of the Goddard Earth Observing System Data Assimilation System (GEOS DAS), generated by the Goddard Global Modeling and Assimilation Office.  The model has a horizontal resolution of 2 deg latitude by 2.5 deg longitude or 1 deg by 1 deg, and 20-55 vertical sigma layers (depending on the version of GEOS DAS).  The following processes are included in the model:

Emissions

(Figure 1: Global annual emission rates for sulfur, dust, OC+BC, and sea salt)

1. Sulfur

Anthropogenic emission of SO2 from fossil fuel and biofuel combustions and transportations is taken from the Emission Data Base for Global Atmospheric Research (EDGAR) (Olivier et al., 1996).  Biomass burning emission of SO2 is scaled to the seasonal variations of burned biomass data (Duncan et al., 2003; Yevich and Logan, 2003). Volcanic emission of SO2 is from continuously erupting volcanoes (Andres and Kasgnoc, 1998) and sporatically erupting volcanoes (when data available).  Oceanic emission of dimethyl sulfide (DMS) is calculated based on the surface seawater concentrations of DMS and 10-m winds over the ocean using an empirical formula (Liss and Merlivat, 1986).

2. Dust

Dust particles ranging from 0.1 to 10 micrometer in radius are considered in the model with 8 size groups (0.1-0.18, 0.18-0.3, 0.3-0.6, 0.6-1, 1-1.8, 1.8-3, 3-6, and 6-10 micrometer).  The emission flux Fp for a size group p is expressed as

Fp = S sp u2 ( u - ut )      if u > ut

Where S is the probability source function, which is the probability of sediments accumulated at the topographic depression regions with bare surface; sp is the fraction of size group p within the soil; u is the surface wind speed, and ut is the threshold velocity of wind erosion, determined by particle size and surface wetness.

3. OC and BC

The biomass burning emissions of OC and BC are estimated from the database of seasonal and interannual variations in the burned biomass (Duncan et al., 2002), developed from long-term satellite observations of global fire-counts and aerosol index and an annual mean burned biomass inventory.  Anthropogenic emissions of OC and BC are taken from a global data set (Cooke et al., 1999).  In addition to direct emissions, the production of OC from terrestrial source is estimated from the emission of volatile organic compounds (Guenther et al.,1995).

4. Sea-salt

Sea-salt emission from the ocean is highly dependent on the surface wind speed, which is calculated as follows:

dF/dr = 1.37u3.41r-3 (1+0.057 r1.05) 101.19 exp(-B2)

where F is the emission flux, r is the particle radius, u is the 10-m winds, and B = (0.380 - log r) / 0.65.  Four size bins are considered in the model with radius of 0.1-0.5, 0.5-1.5, 1.5-5, and 5-10 micrometer.
 

Transport, Chemistry, Dry and Wet Removal

Advection is computed by a flux-form semi-Lagrangian method (Lin and Rood, 1996).  Boundary layer turbulent mixing is treated by a second-order closure scheme (Helfand and Labraga, 1998).  Moist convection is calculated using the cloud mass flux archived in the GEOS DAS data.  Dry deposition includes gravitational settling as a function of particle size and air viscosity, and surface deposition as a function of surface type and meteorological conditions (Wesely, 1989).  Wet deposition accounts for the scavenging of aerosols in convective updrafts and rainout/washout in large-scale precipitation (Giorgi and Chameides, 1986; Balkanski et al., 1993).  Chemical reactions, including reactions of DMS and SO2 with OH in the air and SO2 with H2O2 in cloud, are calculated using prescribed oxidant fields from the IMAGES model (Müller and Brasseur, 1995).
 

Optical Thickness

For a given aerosol type and mass, the wavelength dependent aerosol optical thickness tau is calculated with the following equation:

tau = B Md

where Md is the aerosol dry mass, B is the specific or mass extinction coefficient (m2/g), which is a function of refractive indices, size distributions, particle density, and relative humidity.  The value of B is calculated with a Mie code based on the optical property database in the Global Aerosol Data Set (Kopke et al., 1997). We also assume a maximum B as the value at RH = 99 %.

(Figure 2: mass extinction efficiencies for sulfate, OC, BC, and sea salt as a function of RH and wavelength.)
(Figure 3: mass extinction efficiencies for dust at different sizes).
 

Please refer to the following papers for detailed model description, model results, and all the references listed above.

Chin, M., P. Ginoux, S. Kinne, B. N. Holben, B. N. Duncan, R. V. Martin, J. A. Logan, A. Higurashi, and T. Nakajima, Tropospheric aerosol optical thickness fromt he GOCART model and comparisons with satellite and sunphotometer measurements, J. Atmos. Sci. 59, 461-483, 2002.  [download pdf or send email to Mian Chin for reprint.]

Chin, M., R. B. Rood, S.-J. Lin, J. F. Muller, and A. M. Thomspon, Atmosphericsulfur cycle in the global model GOCART:  Model description and global properties, J. Geophys. Res., 105, 24,671-24,687, 2000.  [download preprint (pdf) (ps) or send email to Mian Chin for reprint.]

Chin, M., D. Savoie, D. Thornton, A. Bandy, B. Huebert, Atmospheric sulfur cycle inthe global model GOCART:  Comparison with observations, J. Geophys. Res., 105, 24,698-24,712, 2000.  [download preprint (pdf) (ps) or send email to Mian Chin for reprint.]

Ginoux, P., M. Chin, I. Tegen, J. Prospero, B. Holben, O. Dubovik, and S.-J. Lin, Sources and global distributions of dust aerosols simulated with the GOCART model, J. Geophys. Res., 106, 20,255-20,273, 2001.  [download preprint (pdf) (ps) or send email to Paul Ginoux for reprint.]

Model Metadata

Name {{metadata.overview.name}}
Version {{metadata.overview.version}}
Model Type {{metadata.overview.modelType}}
Model Domain
{{domain}}
Sacle {{metadata.overview.scale}}

There is no overview about this model. You can click to add overview.

Purpose {{metadata.design.purpose}}
Principles
{{principle}}
Incorporated Models
{{incorporatedModel}}
Model part of larger framework: {{metadata.design.framework}}
Incorporated Models
{{process}}

There is no design info about this model. You can click to add overview.

Information {{metadata.usage.information}}
Initialization {{metadata.usage.initialization}}
Hardware Requirements {{metadata.usage.hardware}}
Software Requirements {{metadata.usage.software}}
Inputs
{{input}}
Outputs
{{output}}

There is no usage info about this model. You can click to add overview.

How to Cite

GOCART team (2020). GOCART (Goddard Chemistry Aerosol Radiation and Transport) model, Model Item, OpenGMS, https://geomodeling.njnu.edu.cn/modelItem/e9cdb3b5-4d63-4201-94c0-a42b74c59094
Copy

QR Code

Contributor(s)

Initial contribute: 2020-01-03

Authorship

Homepage:  
View
Is authorship not correct? Feedback

QR Code

×

{{curRelation.overview}}
{{curRelation.author.join('; ')}}
{{curRelation.journal}}









You can link related {{typeName}} from repository to this model item, or you can create a new {{typeName.toLowerCase()}}.

Related Items
Related Items

You can link resource from repository to this model item, or you can create a new {{typeName.toLowerCase()}}.

Drop the file here, orclick to upload.
Select From My Space
+ add

These authorship information will be submitted to the contributor to review.

Cancel Submit
Model Classifications
Cancel Submit
Localizations + Add
{{ item.label }} {{ item.value }}
Model Name :
Cancel Submit
Name:
Version:
Model Type:
Model Domain:
Scale:
Purpose:
Principles:
Incorporated models:

Model part of

larger framework

Process:
Information:
Initialization:
Hardware Requirements:
Software Requirements:
Inputs:
Outputs:
Cancel Submit
Title Author Date Journal Volume(Issue) Pages Links Doi Operation
Cancel Submit
Add Cancel

{{articleUploading.title}}

Authors:  {{articleUploading.authors[0]}}, {{articleUploading.authors[1]}}, {{articleUploading.authors[2]}}, et al.

Journal:   {{articleUploading.journal}}

Date:   {{articleUploading.date}}

Page range:   {{articleUploading.pageRange}}

Link:   {{articleUploading.link}}

DOI:   {{articleUploading.doi}}

Yes, this is it Cancel

The article {{articleUploading.title}} has been uploaded yet.

OK
Cancel Confirm